Lorex DV900 Series Quick Setup Manual

1 / 2
Quick Setup Guide
Physical setup of recorder and essential system settings
DV900 Series
Package Contents
4K Ultra HD Security DVR
Remote Control Power Adapter
Dimensions
12.8" / 325mm
Need Help?
Visit us online for up-to-date software
and complete instruction manuals
1
Visit lorex.com
Search for the model
2
number of your product
Click on your product
3
in the search results
4
Click on the Downloads tab
Copyright © 2019 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
Ethernet Cable USB Mouse
10.0" / 255mm
2.2"
55mm
Setting Up Your Recorder
Follow the steps below to complete physical setup of your recorder.
To set up your recorder:
8-channel configuration shown. 16 channel will have the respective number of video inputs.
Back panels shown below are for illustration only. Your recorder's back panel may
appear different, with all the same ports in different locations.
STEP 1:
Connect cameras*
Connect your cameras (not included) to your recorder.
NOTES:
• The extension cable must be a single stretch of cable between the recorder and camera.
You cannot connect multiple extension cables to each other.
• This guide covers connecting cameras to your security recorder only. For full instructions on
installing your cameras, please refer to your camera's documentation at lorex.com.
STEP 2:
Connect router*
HDMI Cable
Connect the recorder to your router using the included Ethernet cable.
NOTE: To receive automatic firmware updates and enable remote viewing with computer and
mobile apps, a high speed Internet connection is required (minimum 3.5Mbps upload speed).
All other system features can be used without an Internet connection.
STEP 3:
Connect mouse
Connect the included mouse to a USB port on the recorder.
STEP 4:
Connect monitor*
Connect the recorder to a monitor using the included HDMI cable or a VGA cable
(not included). The HDMI port supports up to 4K resolution, and VGA supports up to
1080p.
NOTE: To optimize picture quality, set the recorder's video output to match the resolution of
your monitor.
STEP 5:
Connect power
Use the included power adapter to connect the recorder to a nearby outlet. Turn the
recorder on using the power switch on the back panel.
Overview of extra ports:
NOTE: For full instructions on using the extra ports, please refer to your security recorder's
instruction manual at lorex.com.
STEP 1: STEP 2:
Connect cameras* Connect router*
STEP 4:
Connect monitor*
For camera compatibility information, visit lorex.com/compatibility.
OR
Audio In/Out RS485
Connect microphone / speaker* Connect Pan-Tilt-Zoom (PTZ) cameras*
STEP 3:
Connect mouse
STEP 5:
Connect power
* Not included / sold separately.
DV900_QSG_EN_R2