Detaching The Stand Base - LG 27UD58-B.AEU Owner's Manual

10
ASSEMBLING AND PREPARING

Detaching the Stand Base

1 Place the screen face down.
CAUTION
To protect the screen from scratches, cover the
y
surface with a soft cloth.
2 Turn the screw to the left.
1
2
Pull out the Stand Base.
S
tand Base
3
As shown in the illustration, pull Screw Cover out to
separate it from the set.
Screw Cover
4
Remove the two screws on the back of stand body.
As shown in the illustration, disconnect the stand
body from the stand hinge.
Stand Body
CAUTION
Illustrations in this document represent typical
y
procedures, so they may look different from the
actual product.
Applying excessive force when tightening screws
y
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
Be careful not to hurt your hand on the edges of
y
the screw covers.
Do not carry the monitor upside down by just
y
holding the base. This may cause the monitor
to fall off the stand and could result in personal
injury.
When lifting or moving the monitor, do not touch
y
the monitor screen. The force applied to the moni-
tor screen may cause damage to it.
CAUTION
It may hurt your foot off the stand, so be careful.