Stream Multimedia Via Miracast - Philips HTB5580 User Manual

Clear browsing history
Clear the browsing history to remove
passwords, cookies, and browsing data from
your home theater.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Network] > [Clear Smart TV
memory].
4
Press OK to confirm.
Rent online video
The function is only available in Smart TV
service that has the VOD feature.
Rent videos from online stores, through your
home theater. You can watch them right away
or later.
Many online video stores offer a huge choice of
video, with different rental prices, periods, and
conditions. For some stores, you must create an
account before you can rent.
What you need
• a USB storage device, with at least 8 GB of
memory
1
Connect your home theater to a home
network with high-speed Internet access
(see 'Connect and set up a home network'
on page 11).
2
Insert a blank USB storage device into the
(USB) connector at the front of your
home theater, and follow the onscreen
instructions to format the USB device.
• After formatting, leave the USB storage
device in the
• After formatting, the USB storage device
will no longer be compatible with
computers or cameras, unless formatted
again using Linux operating system.
3
Press (Home).
4
Select [Smart TV], and then press OK.
» The online services available in your
country are displayed.
(USB) connector.
5
Select a video store, and then press OK.
6
Follow the onscreen instructions to rent
or watch a video. If prompted, enter the
necessary information to register or log in
to the store's account.
» The video is downloaded to your USB
storage device. You can watch it only
on your home theater.
7
Press the playback buttons to control play
(see 'Play buttons' on page 14).
• If you cannot play a video, check the
file format to make sure that it is
supported by your home theater (see
'File formats' on page 30).
Stream multimedia via
Miracast
Through this home theater, you can stream
audio and video from a Miracast certified
device to your TV, and the screen of the
Miracast device is viewed on your TV.
What you need
• Smartphones or tablets with Android 4.2/
Windows 8.1 or above, and check those
devices on whether Miracast feature is
available (the name of Miracast feature
may vary on different devices).
• Enable Miracast on your smartphone or
tablet (refer to a related user manual for
details).
• Make sure that Miracast is enabled on this
home theater (press , and select [Setup] >
[Network] > [Miracast break-in] > [On])
1
Press to display the home menu screen
of this home theater.
2
On the Miracast source device, initiate the
search for this home theater and select this
home theater when it is found (refer to the
source device's user manual for details).
• If this is the first time these 2 devices
are paired, an acknowledgement
EN
21