Philips Headgroom QC5572/15 Manual page 30

ENGLISH
1
2
7 Place the shaving head on your scalp and start
shaving.
Press the shaving head onto your scalp lightly.
Note: Make sure that the shaving foil is always in full
contact with your scalp.
Cleaning and maintenance
Clean the appliance every time you have used it by
rinsing it under the tap or with the cleaning brush
supplied.
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol,
acetone or ethereal oils to clean the appliance.
Be careful that the cutting element does not fall on
the floor.
Cleaning the cutting element and comb
attachments
1 Switch off the appliance and disconnect it from
the mains.
2 Remove the comb attachment.
3 Rinse the comb attachment under the tap or
clean it with the cleaning brush supplied.
4 Place your thumb in the center of the round
side of the cutting element and your index
finger on the teeth of the cutting element
(1). Use your index finger to lift the cutting
element from the swivel head (2).
29