Connecting An Av Receiver Or Digital Sound Bar; Preparing For Internet Connectivity - TCL P Series User Manual

might notice that connecting headphones to your remote control shortens the
remote's battery life somewhat.

Connecting an AV receiver or digital sound bar

You can enjoy Dolby Audio™ multichannel sound from your TV if you connect
a digital amplifier or sound bar (not provided) in either of two ways:
•
Digital optical audio out (S/PDIF) – Connect a TOSLINK optical cable (not
provided) from the TV to the Optical input on your receiver or sound
bar.
• ®
HDMI ARC – Connect an HDMI
(ARC) connector to the HDMI
connection uses the Audio Return Channel (ARC) feature of the HDMI
specification to output sound from the TV to a compatible device. To
use this feature, you must configure the TV to enable HDMI
explained in

Preparing for Internet connectivity

If you want to watch streaming content and take advantage of the cool
features of your TCL • Roku TV, connect it to the Internet through a wireless
modem/router or a wireless access point (not provided). The TV has a built-in
wireless LAN adapter.
Note: The TV supports only its internal wireless network adapter—it does not
support the use of a USB network adapter.
Select 4K models have wired in addition to wireless network connectivity. To
use the wired network connection, connect an RJ-45 Ethernet cable (not
provided) from the jack on the back of your TV to your network router or
switch. The wired connection supports both 10 Base-T and 100 Base-T Ethernet.
®
®
input on your receiver or sound bar. This
®
Enable HDMI ARC.
cable (not provided) from the HDMI
11
®
®
ARC, as