Table of Contents
Advertisement
m
Adjust the camera angle by loosening the screw of the camera mount bracket
while viewing the video monitor.
Be sure to loosen the screw of the camera mount bracket when the camera angle is adjusted.
If the camera angle is changed when the screw is tight, excessive force is applied to the cam-
era mount bracket and camera, and accordingly they may be damaged. Be sure to tighten the
screw securely after camera angle adjustment.
,
Adjust the focus.
When a varifocal lens or a zoom lens is used
• Be aware that the adjustment method varies with varifocal lens or zoom lens models.
• The adjustment procedure for general varifocal lenses is described as follows: For further infor-
mation, refer to the operating instructions for the lens to be used.
q Display a subject that exists as far as possible to adjust the flange back (10 m or more rec-
ommended).
w For 8-, or 10-fold magnification lenses, adjust the flange back (☞ page 22) after setting the
zoom to the WIDE end and the focus to the FAR end.
For 2-, or 3-fold magnification lenses, adjust the flange back (☞ page 22) after setting the
zoom to the TELE end and the focus to the FAR end.
e Adjust the view angle and focus (☞ page 21) with use of the focus assist function to center
a subject in the screen.
When a fixed-focal lens is used
• When using a fixed-focal lens featuring the focus adjustment, adjust the flange back (☞ page
22) after setting the lens focus to the FAR end.
20
Advertisement
Table of Contents
