Table of Contents
Advertisement
Only available while using selection of "First Time Installation"
You can select frequency ranges from this screen. For highlighting lines, use the "▼"or "▲" buttons. You can enter
the frequency range manually by using the numeric buttons on the remote control. Set the Start and Stop Frequency
as desired by using the numeric buttons on the remote control. After this operation, you can set the Search Step as
8000 KHz or 1000 KHz.
If you select 1000 KHz the search will take longer, since the TV needs to check more frequencies. Depending on your
Country selection in the first time installation, a 250 KHz search step option might be available on the Network
Channel Scan screen. Note that if you perform the search with 250 KHz option, the search process could take longer.
Press "OK" to start the installation process. During this progress the bar will fill and found channels will be added to
the list.
Note: If option Digital Aerial & Digital Cable option is selected (only during "First Time Installation"), when DVB‐T
channel search is complete, you need to define the start frequency, end frequency and step for DVB‐C channels. If you
don't know those values, use the default ones and press "OK" to start the search.
When the automatic channel installation is complete, a similar summary like the below picture appears.
11
Advertisement
Table of Contents
