Sound
No sound from home theater speakers.
•
Connect the audio cable from your home
theater to your TV or other devices. You
do not need a separate audio connection
when:
•
the home theater and TV are
connected through an HDMI ARC
connection, or
•
a device is connected to the HDMI IN
connector on your home theater.
•
Set up the audio for the connected device
(see 'Set up audio for connected devices' on
page 16).
•
Reset your home theater to its factory
settings (see 'Apply factory settings' on page
35), and then switch it off and switch on
again.
•
On your home theater, press SOURCE
repeatedly to select the correct audio input.
Distorted sound or echo.
•
If you play audio from the TV through the
home theater, make sure that the TV is
muted.
Audio and video are not synchronized.
•
SOUND SETTINGS. 2) Press
1) Press
the Navigation buttons (left/right) to select
AUD SYNC, and then press OK. 3) Press
the Navigation buttons (up/down) to
synchronize the audio with the video.
Play
Cannot play a disc.
•
Clean the disc.
•
Make sure that the home theater supports
the type of disc (see 'Media formats' on
page 37).
•
Make sure that the home theater supports
the region code of the disc (see 'Region
codes' on page 37).
•
If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalized.
Cannot play a DivX file.
•
Make sure that the DivX file is encoded
according to the 'Home Theater Profile'
with the DivX encoder.
•
Make sure that the DivX file is complete.
DivX subtitles do not display correctly.
•
Make sure that the subtitle file name is the
same as the movie file name (see 'Subtitles'
on page 23).
•
Select the correct character set: 1) Press
OPTIONS. 2) Select [Character Set].
3) Select the supported character set. 4)
Press OK.
Cannot read the contents of a USB storage
device.
•
Make sure that the format of the USB
storage device is compatible with the home
theater.
•
Make sure that the file system on the USB
storage device is supported by the home
theater.
'No entry' or 'x' sign appears on the TV.
•
The operation is not possible.
EasyLink does not work.
•
Make sure that the home theater is
connected to a Philips brand EasyLink TV,
and the EasyLink option is on (see 'EasyLink'
on page 31).
When you switch on the TV, the home theater
automatically switches on.
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch
off EasyLink.
Cannot access BD-Live.
•
Make sure that the home theater is
connected to the network. Use a
wired network connection (see 'Wired
connection' on page 16) or wireless
network connection (see 'Wireless
connection' on page 17).
•
Make sure that the network is set up.
Use a wired network installation (see 'Set
up the wired network' on page 16) or
wireless network installation (see 'Wireless
connection' on page 17).
•
Make sure that the Blu-ray disc supports
BD-Live.
•
Clear memory storage (see 'Clear memory'
on page 21).
Cannot play video or photos from an iPod or
iPhone on the TV.
•
Browse and select videos and photos from
the iPod or iPhone screen, and play them
on your TV.
•
Make sure that the iPod or iPhone software
has not been tampered with or illegally
modified.
EN
41