General Settings - Philips 55PUS6101 User Manual

Home or Shop
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner. Picture
style is set to Vivid automatically. Switch off
timer is switched off.
To set the TV to Shop location...
1 - Press  , select General settings and
 (right) to enter the menu.
press
2 - Select Location > Shop, and press OK.
3 - Press  (left) repeatedly if necessary, to close
the menu.
If you use the TV at home, set the TV in Home
location.
Shop setup
If the TV is set to Shop, you can set the availablility of
a specific demo for in store use.
1 - Press  , select General settings and
 (right) to enter the menu.
press
2 - Select Shop setup and press
the menu.
3 - Select banner, and select Commercial banner
or Promotional banner as in store demo.
4 - Press  (left) repeatedly if necessary, to close
the menu.
TV Guide
For more information, in Help, press the colour

key Keywords and look up TV guide, data and
information.
Channel logos
In some countries, the TV can show the channel
logos.
If you do not want these logos to appear, you can
switch them off.
To switch off the logos...
1 - Press  , select General settings and
 (right) to enter the menu.
press
2 - Select Channel logos and press
enter the menu.
3 - Select Off and press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
 (right) to enter
 (right) to
58
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press  , select General settings and
 (right) to enter the menu.
press
2 - Select HbbTV, and press OK.
3 - Select On or Off.
4 - Press  (left) repeatedly if necessary, to close
the menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press  OPTIONS and select HBB TV on this
channel and press OK.
3 - Select Off and press OK.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings...
1 - Press  , select General settings and
 (right) to enter the menu.
press
2 - Select Factory settings and press OK.
3 - Press  (left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation...
1 - Press  , select General settings and
select Reinstall TV.
2 - Follow the instructions on screen. The installation
may take a few minutes.
Channel list copy
For more information, in Help, press the colour

key Keywords and look up Channel List Copy,
copy.