Table of Contents
Advertisement
Positioning and connecting
en
Transportation
E.g. when moving house
Preparatory work:
Turn off the tap.
1.
Reduce the water pressure in the
2.
supply hose: ~ Page 29; Cleaning
and maintenance – filter in the water
supply blocked
Disconnect the washing machine
3.
from the mains.
Drain the remaining water:
4.
~ Page 28; cleaning and
maintenance – the drain pump is
blocked, emergency draining
Remove the hoses.
5.
Fitting the transportation securing
means:
Remove the covers and keep them
1.
in a safe place.
If required, use a screwdriver.
Insert all four sleeves.
2.
Clip the mains cable securely in the
holders. Insert the transportation
securing bolts and tighten them with
a wrench (WAF 13).
46
Before switching on the appliance
again:
Notes
The transport braces must be
■
removed.
Pour approx. 1 litre of water into
■
compartment II, select the Drain
programme and start.
This will prevent detergent from
flowing unused into the drain during
the next wash.
Advertisement
Table of Contents
