6. AC Adapter (LSL9901B12320)
A. Quick specification review
•
Input voltage
Single phase, 50/60HZ, 100VAC to 240VAC ±10%
•
Input current
1.5A (max), at 90VAC input and full load 0.75A (max), at 264 VAC input and full
load.
•
Inrush current @ cold start
30A(0-peak)@ 110Vac ,50A(0-peak) @ 220Vac
•
Output
Output Volt
+12Vdc
•
Total output power: 60 Watt max.
•
Efficiency
80% min. @115V/230VAC, maximum load.
•
Dimension: 110Lx63Wx31H
7. CIRCUIT DESCRPTION
A. Display-Controller
The U6 is image processor. The functions of the CHIP support as below:
1. Hight quality image scalar
2. On screen display
3. Automatic image optimizer
B. Circuit of Plug and Play
Plug and play allows the serial communication of host PC and peripherals offering minimal
configurations to end users. This monitor supports DDC2B communication protocal.
C. Power Regulator
1. The U5 (APL5883) & U14(APL1085)are linear requlator that transfer input voltage from
5V to 3.3V.
2. The U7 (APL1117) is linear requlator that transfer input voltage from 5V to 2.5V.
Tolerance
Output Current
-
MIN
0A
±5%
16
Volt Tolerance
MAX
5A
11.4~12.6Vdc