Faults Table - Atag WS9211RCL Instructions For Use Manual

FAULTS
What should I do if...

Faults table

Symptom
Lighting is not functioning.
Extractor hood makes a
noise.
No extraction.
EN 8
If the appliance does not work properly, this does not always mean
that it is defective. Try to deal with the problem yourself first. Phone the
service department if the advice given below does not work.
Attention
Disconnect the appliance from the mains before starting the repair,
preferably by removing the plug from the socket or setting the main
switch to zero.
Possible cause
LED lighting defective.
Discharge too long or too
many bends in the duct.
Flap defective.
Flap or controle defective.
Connection cable defective.
Solution
Phone the service
department.
Change the discharge ducting
(see installation guide).
Phone the service
department.
Phone the service
department.