Factory Mode
You can entry into factory mode when press "Auto" and then press"Power" Key(LED light),it is successful
if Power LED Light is amber.
Factory1 Adjustment
Reset:
Resets all settings to default levels.
Factory 2 Adjustment
This page only visible in factory mode
AUTO BURN :
Use the chip set internal pattern for hot
Use the chip set internal pattern for hot
AUTO COLOR :
Perform Auto Balance measurement .
COLOR UPDATE :
Force presently R,G,B offset and gain
parameters update to currently temperature
memory address.
FACTORY RESET :
Recall to factory setting and power off
immediately.
- 25 -