Table of Contents
Advertisement
Parameter
Link
Disable DF to external IP
Sync Flood Propagation
Disable DF sync flood
propagation
Freeze DF module queues on
error
CC6 memory region encryption
System probe filter
Memory Clear
PSP error injection support
BIOS Setup
Description
Press [Enter] for more options.
GMI encryption control
Š
– Control GMI link encryption.
– Options available: Disable/Enable/Auto. Default option is Auto.
xGMI encryption control
Š
– Control xGMI link encryption.Options available: Disable/Enable/
Auto. Default option is Auto.
CAKE CRC perf bounds control
Š
– Control CAKE CRC perf bounds
– Options available: Auto/Manual. Default option is Auto.
4-link xGMI max speed
Š
– Set 4-link xGMI max speed.
– Options available: 10.667Gbps/13Gbps/16Gbps/18Gbps/Auto.
Default option is Auto.
3-link xGMI max speed
Š
– Set 3-link xGMI max speed.
– Options available: 10.667Gbps/13Gbps/16Gbps/18Gbps/Auto.
Default option is Auto.
xGMI TXEQ Mode
Š
– Select XGMI TXEQ/RX vetting Mode.
– Options available: TXEQ_Disabled/TXEQ_LAne/TXEQ_Link/
TXEQ_RX_Vet/Auto. Default option is Auto.
Disable SyncFlood to UMC & downstream slaves.
Options avaialble: Sync flood disabled/Sync flood enabled/Auto.
Default option is Auto.
Enable/Disable DF SyncFlood.
Options avaialble: Sync flood disabled/Sync flood enabled/Auto.
Default option is Auto.
Controls DF PIE Config. Disabling this options sets DF:PIEConfig.
Options available: Disable/Enable/Auto. Default option is Auto.
Control whether or not the CC6 save/restore memory is encrypted.
Options available: Disable/Enable/Auto. Default option is Auto.
Controls whether or not the probe filter is enabled. Has no effect on parts
where the probe filter is fuse disabled.
Options available: Disable/Enable/Auto. Default option is Auto.
When this feature is disabled, BIOS does not implement MemClear after
memory training (only if non-ECC DIMMs are used).
Options available: Disable/Enable/Auto. Default option is Auto.
Select True to enable error injection.
Options available: False/True. Default option is False.
- 86 -
Advertisement
Table of Contents
