4 Use your TV
Switching on your TV and putting it in Standby
mode
55ME314V / 50ME314V / 40ME314V /
40ME324V / 32ME304V / 28ME304V
TV
Remote Control
To Turn the TV On from Standby or Off to Standby
Press B on the Side or Front panel or the Remote Control.
●
Note(s)
Energy Consumption contributes to air and water pollution. When the AC Power Cord
●
is plugged in, your TV consumes energy with a very low standby Power Consumption.
Adjusting Volume
55ME314V / 50ME314V / 40ME314V /
40ME324V / 32ME304V / 28ME304V
TV
Remote Control
55" - 39"
To decrease or increase Volume
Press VOL J / K on the Front panel or press VOL + / – on the Remote
●
Control or the Side panel.
VOL J(-) : Volume Down
VOL K(+) : Volume Up
To mute or unmute sound
Press D on the Remote Control to mute the sound.
●
Press D again or VOL + / – to recover the original sound.
●
39ME313V/F7 A
TV
39ME313V/F7 A
TV
32" - 28"
Switching Channels
55ME314V / 50ME314V / 40ME314V /
40ME324V / 32ME304V / 28ME304V
TV
Remote Control
55" - 39"
To select Channels by using CHI / H or CH + / –
Press CH I (Down) / H (Up) on the Front panel or press CH + / –
●
on the Remote Control or the Side panel.
To select Channels by using the NUMBER keys
Digital TV Operation
For Digital channels, press a number followed by a dot "•" and the
●
corresponding sub channel number.
When selecting Digital channel 11.1
–
Be sure to press • before entering the subchannel number.
Cable / NTSC (Analog) TV Operation
When selecting Cable or Analog channel 11
–
Press PREV.CH to return to the previously viewed channel.
Note(s)
To select the non-memorized channels, use the NUMBER keys.
●
No signal will appear on the TV screen after the subchannel broadcast is over.
●
Audio only program message will appear on the TV screen, when you receive only a
●
sound signal.
17
39ME313V/F7 A
TV
32" - 28"
.
English