Okina USA ESP-3420 Operational Manual

ESP-3420
ESP-3420A
With Audio
ESP-3420P
ESP-3420AP
With Audio
Operational Manual
Covert PIR Color Camera
FEATURES
1/3" Sony Super HAD CCD
420 TV Lines
3.7mm Lens
0.1 Lux @ F1.2
Built-in Microphone only for ESP-3420A
12V DC
SPECIFICATIONS
Model ESP-3420
TV System NTSC
Image Sensor
DSP
Total Pixel
510 x 492
(H x V)
Synchronizing
System
Resolution
Minimum
Illumination
S/N Ratio
Gain Control
White Balance
Gamma
Electronic 1/60 ~
Shutter 1/100,000sec
Audio No
Video Output
Lens
Power Supply
Power
Consumption
Operating
Temperature
Dimension
*Specifications are subject to change without notice
P = PAL Version
This is only a covert camera,
not an alarm device. This
camera has NO PIR function.
Please read the Operational Manual
before attempting to use this product.
ESP-3420P ESP-3420A ESP-3420AP
PAL NTSC
1/3" Sony Super HAD CCD
Sony
500 x 582 510 x 492
Internal
420 TV Lines
0.1 Lux @ F1.2
50dB
Auto
Auto
0.45
1/50 ~ 1/60 ~
1/110,000sec 1/100,000sec 1/110,000sec
Yes
1Vp-p composite / 75 Ω
3.7mm Lens / F2.0
12V DC
200mA
-10°C ~ +50°C
70(W) x 120(H) x 48(D) mm
PACKAGE CONTENTS
One (1) ESP-3420/ESP-3420P Camera with power/video
cables or ESP-3420A/ESP-3420AP Camera with
power/video/audio cables
One (1) Angle Adjust Wall Mounting Bracket
One (1) Operational Manual
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as
this may damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling
could damage the camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable
temperature range for operation of this camera is between
-10°C ~ 50°C and the allowable humidity is 85%RH maximum.
4. Clean the front face to the pick-up device
It is recommended that the pick-up device surface be cleaned
before lens installation or whenever the lens is changed.
Cleaning should be done by using a chamois, a very fine soft
cloth, lens tissue, or cotton tipped applicator and ethanol to
carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified
range. (Camera must meet the specifications). Camera must
be connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may
touch dangerous voltage points of short out parts that could
result in a fire or electric shock. Never spill any kind of liquid
on the video product.
PAL
7. Servicing
Do not attempt to service this video product by yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all service to qualified
500 x 582
servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer
service to qualified servicing personnel under the following
conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet
1/50 ~
has been damaged.
e. When the video product exhibits a distinct change in
performance.
9. Please follow your local privacy laws and regulations
when using covert cameras with or without audio
recording in a public setting. Manufacturer and/or
distributor are not responsible for any improper
usage of this camera.
CAUTION
REV020110