To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The programme duration is
Note:
included in the selected "Ready in" time.
After the start, the preselected time e.g.
8 h is displayed and the time counts
down to the start of the wash
programme. The programme duration is
then displayed, e.g. 2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
Press Start/Reload A .
1.
Press the Ready in ð button
2.
repeatedly until the required number
of hours is displayed.
Press the Start/Reload A button.
3.
Adding laundry while the preselected
time continues running:
Press Start/Reload A .
1.
The symbols YES and ¼ light up on
2.
the display panel. The washing
machine door can be opened and
laundry can be added.
Close the washing machine door.
3.
Press the Start/Reload A button.
4.
The preselected time continues to
run.
Additional programme settings
\
Additional programme
settings
SpeedPerfect G
A d d i t i o n a l p r o g r a m m e s e t t i n g s
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Notes
Do not exceed the maximum load.
■
Overview of programmes
~ Page 13
SpeedPerfect G is preset by
■
default. To deactivate this additional
default setting, press the
SpeedPerfect G button. The
indicator light goes off.
EcoPerfect F
For saving energy with a washing result
comparable to that of the standard
programme.
Water Plus Z
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for further
enhancing the spin result.
en
17