Table of Contents
Advertisement
Karaoke
1
Connect a microphone (not supplied) to
the MIC connector on this player.
2
Press
to display the home menu.
3
Select [Karaoke], and press OK.
» The Karaoke menu is displayed.
4
Select [Microphone] > [On], and press
OK to turn on the microphone sound
output.
5
Play a disc, and then sing through the
microphone.
Set up Karaoke via the Karaoke menu
•
[Microphone]: Turn on or off microphone
sound output.
[Mic Volume]: Change microphone volume.
•
[Echo]: Change the echo level.
•
[Karaoke Scoring]: Select a difficulty level
•
to score your singing. After a song ends, a
score is given.
[Karaoke Idol]: Have a Karaoke contest
•
with your friends. Follow the on-screen
instructions to start the contest.
•
[Key Shift]: Change the key level of music.
[Vocal]: Select a Karaoke audio mode, or
•
turn off original vocals.
Record your songs
You can record your own songs onto a USB
storage device. The recorded songs are saved as
.MP3 files.
1
Insert a USB storage device.
2
KARAOKE.
Press
3
Follow the on-screen instructions to make
a setting, and press OK to start recording.
» The recording stops at the end of the
song.
•
To exit the recording, press
KARAOKE again.
Note
•
Make sure that the USB storage device has enough
memory remaining.
•
Neither DTS discs nor copy-protected discs can be
recorded.
Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1
Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on the TV and other
connected devices (see the user manual of
the TV or other devices for details).
2
Press .
3
Select [Setup]> [Video] > [HDMI Setup]
> [EasyLink Setup].
4
Select [On] under the options: [EasyLink],
[One Touch Play] and [One Touch
Standby].
» EasyLink function is turned on.
One Touch Play
When you play a disc on this player, the TV
automatically switches to the correct video
input source.
One Touch Standby
When a connected device (for example TV)
is put to standby with its own remote control,
this player is put to standby automatically.
EN
11
Advertisement
Table of Contents
