Philips 32PFL4902/F7 User Manual page 29

Table of Contents

Advertisement

Y Y ou may adjust picture quality and enhancement settings using Pixel
Plus HD and Advanced settings sub menus.
Auto picture
Dynamic contrast
Backlight
Color enhancement
Contrast
Black stretch
Brightness
120 PMR
Color
Macro Dimming
Tint
Noise reduction
Sharpness
MPEG artifact reduction
Pixel Plus HD
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
To select the desired setting, then press OK
Dynamic
(Off, Minimum, Medium and Maximum)
contrast
To set color enhancement to off
Off
Color
enhancement
On
To make colors more vivid and bright
Black
To select the desired setting, then press OK
stretch
(Off, Minimum, Medium and Maximum)
Off
To set 120 PMR to Off
120 PMR
On
To make the video appear smoother
Macro
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Dimming
To select the desired setting, then press OK
Noise
(Off, Minimum, Medium and Maximum)
reduction
MPEG
To select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Auto picture
Backlight
Off
Contrast
Minimum
Brightness
Medium
Color
Maximum
Tint
Sharpness
Pixel Plus HD
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
alignment
Custom color
management
Gamma
Film mode
Mode selection is available only if
–The external input modes are selected HDMI 1 or HDMI 2.
–The connected HDMI device is outputting a video signal.
Color alignment
Custom color management
Gamma
Film mode
To set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
Cursor
To decrease red
Red gain
contrast
To decrease green
Green gain
Color
contrast
To decrease blue
Blue gain
contrast
To decrease red
Red offset
brightness
To decrease green
Green offset
brightness
To decrease blue
Blue offset
brightness
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
Cursor
To rotate only
Tint
selected color tint in
clockwise direction
To decrease color
Saturation
with only selected
color
To decrease
Brightness
brightness with only
selected color
To select the desired setting, then press OK
(Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
To set film mode to off
Off
To optimize the picture recorded by the
Auto
original film
Note(s)
29
.
English
Mode
Red gain
Green gain
Blue gain
Red offset
Green offset
Blue offset
Cursor
To increase red
contrast
To increase green
contrast
To increase blue
contrast
To increase red
brightness
To increase green
brightness
To increase blue
brightness
Cursor
To rotate only
selected color tint in
counterclockwise
direction
To increase color
with only selected
color
To increase
brightness with only
selected color
Continued on next page.

Advertisement

Table of Contents
loading

This manual is also suitable for:

32pfl49024000 series

Table of Contents