1. Manuals
  2. Brands
  3. Zenit Powertools Manuals
  4. Grinder
  5. AG-115/850
  6. Instruction manual

Zenit Powertools AG-115/850 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
anGlE GrInDEr
aG-115/850
InstructIon manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AG-115/850 and is the answer not in the manual?

Questions and answers

Related Manuals for Zenit Powertools AG-115/850

Summary of Contents for Zenit Powertools AG-115/850

  • Page 1 GrInDEr aG-115/850 InstructIon manual...

  • Page 3: General Safety Precautions

    General safety precautions WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before operating this product and save these instructions. For safe operations: 1.
  • Page 4 17. Avoid unintentional starting. Do not carry a plugged in tool with a finger on the switch. Ensure switch is off when plugging in. 18. Use outdoor extension leads. When tool is used outdoors, use only extension cords intended for outdoor use. 19.

  • Page 5: Technical Specifications

    1. Spindle lock button; 2. Reducer case; 3. Grinding wheel; 4. Protective cover; 5. Additional handle; 6. «On\Off» switch; 7. Engine case. technical specifications Model AG-115/850 Rated power 850 W Rated voltage 220-240 V Rated frequency 50-60 Hz Disc diameter 115 mm...

  • Page 6: Prior To Operation

    materials and castings. - Grinding of welded sections or sections cut by means of an acetylene torch. - Grinding of synthetic resin, slate, brick, marble etc. - Cutting synthetic concrete, stone, brick, marble and analogous materials. prior to operation 1. Power source. Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate.

  • Page 7: Grinder Operation

    Grinder operation 1. Grinding pressure There is no need to press hard when grinding. Usually the grinder’s own weight is suf- ficient to allow the required light contact with surface to be ground. Heavy pressure can result in wheel breakage. It can also damage the surface being ground or damage the grinder’s motor.

  • Page 8: Maintenance And Inspection

    CAUTION Tighten the wheel nut securely and confirm that the depressed center wheel does not wobble. Make sure that the push button is disengaged by pushing lock button two or three times before turning on the grinder. Maintenance and inspection 1.
  • Page 9 • check the engine temperature, do not allow overheating; • change the rotation direction only after switching off the tool and complete stop of rotating parts. Inobservance of these rules will make warranty void! WARNING! Repair, modification and check of ZENIT power tools should be performed only in authorized service centers ZENIT.
  • Page 10 Demix LLC Head office: 14, Shevchenko str., 3rd floor Dnepropetrovsk, Ukraine, 49044 tel./fax: +38 056 375-43-16 http://www.en.zenit-profi.com...

This manual is also suitable for:

Zush-115/850

Table of Contents