Table of Contents
Advertisement
Quick Links
PETROL
EDGER
25.4 cc 1 HP
INSTRUCTION MANUAL
SPECIFICATIONS
Engine:
25.4cc, 2 Stroke, Air Cooled
Power:
0.75kw (1HP)
Fuel & Oil Mix
40:1
Fuel Tank Capacity:
650ml
Starter Type:
Recoil
Max. No Load Speed: 9000/min
Blade Length:
225mm
Blade Adj. Heights:
-20 to 30mm, 5 position
Tool Weight:
11.5 kgs
ozito.com.au
1
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example:
Cutting blade, filters, spark plugs and included accessories.
WARNING
The following actions will result in the warranty being void.
• Professional, Industrial or high frequency use.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
STANDARD EQUIPMENT
Petrol Edger
Top & Lower Handle
Fuel Mixing Bottle &
Spark Plug Spanner
Spanners, Hex Key &
Cable Ties
Fasteners, Rubber
Mudguard & Plate
PED-3005
0519
Advertisement
Table of Contents
Related Manuals for Ozito PED-3005
Summary of Contents for Ozito PED-3005
- Page 1 Spanners, Hex Key & ozito.com.au Cable Ties Fasteners, Rubber Mudguard & Plate PED-3005 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition WARRANTY YOU MUST RETURN THE PRODUCT to other rights and remedies which are available to you at law.
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION PETROL EDGER 1. ASSEMBLY 1. Upper handle 11. Wheel 2. Handle lock knob 12. Mudguard Securing the Handles 3. Lower handle 13. Priming bulb 4. Engine frame 14. Cutting blade The upper handle and lower handle need to be secured in place 5. -
Page 3: Adjusting Cutting Depth
2. FUEL 3. ADJUSTING CUTTING DEPTH The edger has a height adjustment lever to easily adjust the WARNING!: PETROL IS VERY FLAMMABLE. AVOID cutting height. SMOKING OR CAUSING ANY SPARKS OR FLAMES There are 5 settings ranging between -20 to 30mm. NEAR FUEL. -
Page 4: Operation
OPERATION 4. STARTING & STOPPING Starting 6. Tilt the unit backwards, so that the blade is clear of the ground. NOTE: Do not squeeze the throttle before starting. 1. Press the On/Off switch on the handle to the On (I) position. Release the safety then squeeze the throttle gently. - Page 5 This assists in clearing the debris from the blade and guard. If the debris does not fall out, stop the engine, wait for the blade to stop rotating and remove debris from the blade guard. PED-3005...
-
Page 6: Changing The Cutting Blade
1. Lay the petrol edger on its side into a liquid. with the cutting blade facing NOTE: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool. NOTE: The cutting blade rotates in anti-clockwise direction. -
Page 7: Problem Solving
Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito customer service Australia 1800 069 486 New Zealand 0508 069 486 E-mail: enquiries@ozito.com.au... -
Page 8: Safety Instructions
SAFETY INSTRUCTIONS RISK OF EXPLOSION OR FIRE c) Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the petrol tool may result in personal What can happen: injury.
Need help?
Do you have a question about the PED-3005 and is the answer not in the manual?
Questions and answers
I have a problem with my ozito 3000 will start andwill only do a small run,The fuel lines have been replaced and the problem remains. please can you help
Possible causes for your Ozito PED-3005 not starting properly despite replacing the fuel lines include:
1. No Fuel in the Tank – Check if there is sufficient fuel in the tank.
2. Water in the Fuel Mixture – Drain and rinse the entire fuel system to remove any water contamination.
3. Clogged Air Filter – A dirty air filter can restrict airflow. Clean the air filter to ensure proper engine function.
4. Spark Plug Issues – Ensure the spark plug is properly connected and in good condition.
5. Engine Overheating or Dust Buildup – Clean the engine housing to remove dust particles that may cause overheating.
If the issue persists, further inspection of the ignition system or carburetor may be necessary.
This answer is automatically generated
Hi! My PED-300 had the fuel lines disintegrate. Bought new fuel lines, but which is which to the carburetor, like what is the lead in and the overflow out? Can you advise? One pipe from the carby is bigger than the other. That may help me as a guide.