Advertisement
Bluetooth Device Pairing
The pairing process can vary based on your particular device.
Refer to the operating instructions of your device. Below is the
general process to connect the controller.
The Bluetooth Controller will flash slowly when "searching" for the
last paired device.
If no device is located, it will flash quickly indicating it is ready to
pair to a new device. On your Bluetooth enabled device, search for
Hifonics under Bluetooth settings.
Select Hifonics; wait for the device to indicate "connected". The
status indicator will change to solid red. Music will now play through
the system.
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it's discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
www.maxxsonics.com
Installation Guide
Bluetooth® Controller
HF TPS=BT1 QSG 01 - rev1
Quick Start
TPS-BT1
Advertisement
