Advertisement
REMINDER
CALL 1-888-314-2588
BEFORE RETURNING TO STORE.
PACKAGE CONTENTS
Part
A
B
C
A
WARNINGS AND CAUTIONS
WARNING
•
To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle .
•
Do not exceed the input voltage shown on the transformer.
•
Do not submerge the transformer.
•
To reduce the risk of fire or injury, keep lamp away from materials that may burn.
•
Always disconnect light from the power source before beginning any maintenance or work on the light.
•
Inspect cord for damage before installation and/or maintenance. Replace the entire light/transformer
assembly if damage is found.
CAUTION
•
Use a proper power source as indicated on the transformer label.
•
Keep the cord away from high temperatures or other heat sources.
•
Do not lift the light or the transformer by its power cord.
•
This light assembly is not intended for use in swimming pools or hot tubs.
Waterfall Cascade with White LED
Lights
Description
Spillway
Transformer
Hose clamp
Questions, problems, missing parts? Before returning
to your retailer, call our customer service department at
1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday. Or
visit our website www.aquanique.com.
Quantity
1
1
1
B
C
ITEM # QDLS12B
Advertisement
Table of Contents
Related Manuals for aquanique QDLS12B
Summary of Contents for aquanique QDLS12B
- Page 1 Waterfall Cascade with White LED Lights ITEM # QDLS12B REMINDER Questions, problems, missing parts? Before returning to your retailer, call our customer service department at CALL 1-888-314-2588 1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday. Or BEFORE RETURNING TO STORE. visit our website www.aquanique.com.
- Page 2 PREPARATION Before beginning assembly or operation of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. •...
- Page 3 5. Connect the tubing to the inlet of the spillway using the adapter. Connection method (a) Slip the hose clamp on to the tubing but do not tighten it. Fig. 5 NOTE: The spillway has two ports to install the inlet. For installing with this kit, using connection (a) is preferred.
- Page 4 8. This unit also can be used in new and existing ponds and is an ideal way to add color to a waterfall. For existing ponds Weir Tubing with a waterfall simply re-plumb the tube/pipe that discharges into the existing waterfall and place the lit spillway at the top of the waterfall insuring that the unit is level.
- Page 5 12. Connect the tubing to the pump and place it in the tub. Fig. 12 Fig. 12 13. Fill the tub with water. Fig. 13 Fig. 13 14. Connect the spillway to the transformer by pushing the plug into the transformer socket until it is firmly seated.
- Page 6 16. Connect the pump to a proper power source. Fig. 16 GFCI Fig. 16 CARE AND MAINTENANCE – SPILLWAY • Clean the spillway regularly depending upon the environment in which it is operated. Clean the spillway when it is visibly soiled or when a drop in performance is detected. •...
- Page 7 All aquanique™ electrical products are warranted to the user against defective material and workmanship, under normal working conditions for 1 year from the date of purchase. All aquanique™ liners are warranted to the user against defective workmanship, under normal working conditions for 20 years from the date of purchase.
Need help?
Do you have a question about the QDLS12B and is the answer not in the manual?
Questions and answers