Advertisement
Cooling operation
ON
Natural wind by the CHAOS logic
For fresher feeling, press the Indoor fan speed selector and set to CHAOS mode. In this mode, the wind
blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.
1
Press the Start/Stop button.
The unit will respond with
a beep.
Open the door of the remote controller. To select Cooling
2
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Cooling
Close the door of the remote controller. Set the temperature
3
lower than the room temperature. The temperature can be
set within a range of 18°C-30°C at intervals of 1°C
Set the fan speed again with the door
4
of the remote controller still closed.
You can select the fan speed in four
steps-low, medium, high and CHAOS.
Each time the button is pressed, the
fan speed mode is shifted.
Operating Instructions
Auto
Healthy
Dehumidification
(Heat pump model only)
To raise the temperature
To lower the temperature
Owner's Manual 15
Heating
Advertisement
