Electrolux EI30BM6CPS Installation Instructions Manual page 24

NOTE: IT IS VERY IMPORTANT TO
READ AND FOLLOW THE DIRECTIONS
IN THE INSTALLATION INSTRUCTIONS
BEFORE PROCEEDING WITH THIS
REAR WALL TEMPLATE.
This Rear Wall Template serves to position the bottom
mounting plate and to locate the horizontal exhaust
outlet.
1. Use a level to check that the template is positioned
accurately.
2. Locate and mark at least one stud on the left or
right side of the centerline.

I t is important to use at least one wood
screw mounted firmly in a stud to support the weight
of the microwave. Mark two additional, evenly spaced
locations for the supplied toggle bolts.
3. Drill holes in the marked locations. Where there is
a stud, drill a 3/16" hole for wood screws. For holes
that do not line up with a stud, drill 5/8" holes for
toggle bolts.

D O NOT INSTALL THE MOUNTING PLATE
AT THIS TIME.
4. Remove the template from the rear wall.
5. Review the Installation Instruction book for your
installation situation.
Darle vuelta a la hoja para consultar la
versión en Español.
Locate and mark holes to align with holes in the
mounting plate.
IMPORTANT:
LOCATE AT LEAST ONE STUD ON EITHER SIDE OF
THE CENTERLINE.
MARK THE LOCATION FOR 2 ADDITIONAL, EVENLY
SPACED TOGGLE BOLTS IN THE MOUNTING PLATE
AREA.
Trim the rear wall template along the dotted line.
Part No.:316902912

3/8＂
3/8＂
2＂
Part No.:7 7 2 2 2 3 16902475
PN: 2618003 9832 1

4" 







13-3/8＂
1/2＂
3/8" TO EDGE
12"

8-1/4＂
IN THE BEFORE NOTE: READ AND IT IS FOLLOW PROCEEDING INSTALLATION VERY IMPORTANT THE DIRECTIONS INSTRUCTIONS TO
READ AND BEFORE NOTE: IT IS IN THE INSTALLATION VERY IMPORTANT FOLLOW THE DIRECTIONS TO outlet. 1. Use mounting This Rear REAR WALL a level plate Wall Template TEMPLATE. serves and to locate WITH THIS to position the horizontal the bottom 12" 3/8" TO EDGE
REAR WALL PROCEEDING outlet. plate and mounting This Rear Wall Template to locate TEMPLATE. to position INSTRUCTIONS WITH THIS serves 12" 3/8" TO EDGE 2. Locate  screw side of right mounted and mark accurately. It is important the centerline. at least to check that the template one stud exhaust is positioned left or on the 4"  
 right side and mark 2. Locate accurately. 1. Use a level of the at least to check one stud template that the the horizontal the bottom exhaust is positioned 4"  locations of the 3. Drill microwave. that do for the drill a stud, holes firmly to use in a stud Mark two supplied in the a 3/16" marked locations. toggle at least to support bolts. additional, the weight spaced evenly one wood    Trim the rear wall
microwave. screw mounted holes in It is important of the locations for the 3. Drill supplied Mark two in a stud firmly centerline. to support at least toggle additional, to use on the one wood evenly left or the weight     Trim the rear wall  AT THIS 4. Remove 5. Review DO NOT not line TIME. the template bolts. toggle the Installation up with from the INSTALL THE MOUNTING PLATE hole for wood screws. a stud, Where drill 5/8" holes there for For holes is   template along the dotted line.
 toggle DO NOT a stud, that do TIME. AT THIS 3/16" hole not line INSTALL the marked drill a up with bolts. THE MOUNTING a stud, locations. for wood bolts. Where there screws. drill 5/8" holes for is For holes spaced   template along the dotted line. Darle vuelta versión a la hoja installation situation. rear wall. Instruction book for your
the Installation 4. Remove installation the template 5. Review situation. rear wall. from the Instruction book for PLATE your en Español. para consultar la 
en Español. versión Darle vuelta para consultar a la hoja la Locate and mark  
 mounting LOCATE THE CENTERLINE. IMPORTANT: AT LEAST plate. ONE STUD holes to align with holes in the     
and mark mounting Locate IMPORTANT: plate. holes to align with holes       AREA. SPACED MARK THE LOCATION TOGGLE BOLTS FOR 2 ON EITHER IN THE ADDITIONAL, EVENLY SIDE OF   
AT LEAST LOCATE THE CENTERLINE. MARK THE ONE STUD ON EITHER SIDE OF in the    MOUNTING PLATE  
AREA. TOGGLE SPACED BOLTS LOCATION IN THE FOR 2 ADDITIONAL, MOUNTING EVENLY PLATE  Trim the rear wall template along the dotted
  line. 
Trim the rear wall template along the dotted
line.   mounting IMPORTANT: Locate and mark plate. holes to align with holes in the
Locate and mark THE CENTERLINE. LOCATE MARK THE SPACED LOCATION AT LEAST FOR 2 ONE STUD ON EITHER SIDE OF
 IMPORTANT: mounting LOCATE plate. AT LEAST holes to align with holes in the  AREA. TOGGLE IN THE BOLTS MOUNTING ADDITIONAL, PLATE EVENLY
MARK THE SPACED AREA. THE CENTERLINE. LOCATION BOLTS TOGGLE FOR 2 ONE STUD ON EITHER ADDITIONAL, SIDE OF
 IN THE MOUNTING PLATE EVENLY 



6-1/4＂
12-1/2＂
EN-24
Trim the rear wall template along the dotted line.
Locate and mark holes to align with holes in the
mounting plate.
IMPORTANT:
LOCATE AT LEAST ONE STUD ON EITHER SIDE OF
THE CENTERLINE.
MARK THE LOCATION FOR 2 ADDITIONAL, EVENLY
SPACED TOGGLE BOLTS IN THE MOUNTING PLATE
AREA.

13-3/8＂
3/8＂
2＂
Printed in China

3/8＂