Replacement Of Light Bulbs - Hyundai 2009 Sonata Owner's Manual

6
DO-IT-YOURSELF MAINTENANCE
28
G290B01NF-AAT
Adjustment After Headlight Assem-
bly Replacement
Horizontal line
H
If the vehicle has had front body repair and
the headlight assembly has been replaced,
the headlight aiming should be checked
using the aiming screen as shown in the
illustration. Turn on the headlight switch
(Low Beam Position).
1. Adjust headlights vertically so that cutoff
line is aligned with horizontal line shown
in the illustration.
2. Dotted lines in the illustration show the
center of the headlights.
SPECIFICATION:
"H"
Horizontal center line of headlights from
ground : 27.05 in. (687mm)
Vertical line
W
"W"
Distance between each headlight center :
H 51.5 in. (1,308mm)
Cut-off line
"L"
L
Ground line Distance between the headlights and the
wall that the lights are tested against :
118.11 in. (3,000 mm)
G290B01NF
REPLACEMENT OF LIGHT
BULBS
G260A02L-GAT
Before attempting to replace a light bulb,
be sure the switch is turned to the "OFF"
position.
The next paragraph shows how to reach
the light bulbs so they may be changed. Be
sure to replace the burned-out bulb with
one of the same number and wattage
rating.
See page 6-35 for the wattage descrip-
tions.
!
CAUTION:
o Keep the lights out of contact with
petroleum products, such as oil,
gasoline, etc.
o Be sure to replace the LED type
equipped bulbs with an assembly.
o After heavy, driving rain or washing,
headlight and taillight lenses could
appear frosty. This condition is
caused by the temperature difference
between the lamp inside and outside.
This is similar to the condensation on
your windows inside your vehicle
during the rain and doesn't indicate a
problem with your vehicle. If the water
leaks into the lamp bulb circuitry, have
the vehicle checked by an Authorized
Hyundai Dealer.