Zico ZI-2006 User Instructions

ZI-2006
ZI
Heat Gun 2000W –
tool
Professional
User Instuctions -

IMPORTANT SAFETY INSTRUCTIONS

Pay close attention to safety guidelines and warnings included for your protection.
WARNING
 To reduce risk of fire or electric shock , do not expose to rain or moisture. Store indoors. Read instruction manual before using.
 Nozzle gets extremely hot. Wear gloves and eye protection.
 For safe operation, read manual thoroughly.
 When servicing, use only identical replacement parts.
 NEVER USE THE HEAT GUN AS A HAIR DRYER!
 Never direct the hot airflow toward people or animals.
 Never use the heat gun near flammable materials or gases.
 Never obstruct the hot airflow by blocking or covering the air outlet. Never Touch the hot air nozzle. It becomes extremely hot.
 Wear protective work gloves at all times.
 Never touch the nozzle to any surface when running the gun or shortly after running.
 Always wear eye protection when removing paint from overhead position.
 Do not wear loose-fitting clothing or jewelry. Wear nonskid footwear and a protective hair covering to contain long hair.
 Maintain proper balance and footing at all times.
 Keep the gun handle dry, clean and free from oil and grease.
 Do not force the tool or accessories and use only for the purpose intended.
 Always stand gun in an upright position or hang it up by its convenient hanger.
 Never use the tool in wet environments or areas of high humidity (for example: bathroom, steamrooms, etc.).
 Never use the gun in the rain or on extremely damp days.
 Never poke anything down inside the hot air nozzle.
 Always allow the heat gun to cool down completely before storing it.
 Always store the gun in a safe place, out of the reach of children. IT IS NOT A TOY.
 Know the work environment. Areas behind ceilings, floors and soffits may contain highly flammable materials. Always check these areas before applying heat.
 Keep work area clean and uncluttered.
 Keep work area well lighted.
 Keep children and visitors away from work area, the tool, and extension cords.
 Guard against electric shock by preventing contact, with grounded surfaces (for example: pipes, radiators, ranges and refrigerator enclosures.)
 Never carry the gun by its power cord or yank the cord from an electrical outlet.
 Use only proper rated extension cords. (See following sections.)
 Inspect extension cords periodically and replace if damaged.
 Inspect tool cords periodically and if damaged, have repaired by authorized service personnel.
 When working on small or irregular shaped objects, secure work in a vise or clamps.
 Disconnect the tool when not in use. Avoid unintentional starting. If the gun stops during operating, disconnect from the power supply and have gun serviced by authorized service personnel.
 Stay alert! Always pay attention to the work at hand and use common sense when operating this and all tools. Do not operate the tool when you are tired or taking medication or drugs that may make you drowsy.
1