Related Manuals for Zico Zi-9633
Summary of Contents for Zico Zi-9633
- Page 1 Zi-9633 Camera Test & Video Borescope User’s Gaide Please read this manual before switching the unit on. Important safety information inside.
-
Page 2: Table Of Contents
Camera Test & Video Borescope Contents Page 1.Warning .................. 2.Introduction ................3.Function Description ..............4.Specifications ................5.standard configuration ..............6.Panel name and function description ..........7.Operation Instructions ..............8.Notes .................. -
Page 3: Warning
Camera Test & Video Borescope 1.Warning Safety Notes Before using the instrument, please read all safety information and specification of the Video borescope carefully. Application places • Can be apply to detect the internal components of instruments working normally or not(such as: cars or large machines) •... -
Page 4: Function Description
Camera Test & Video Borescope 3.Function Description Support the real-time view Support AV input Highlighted with LED,to support the operation of the dark places Built-in 1400mAh lithium battery, support USB charging Standby function to support the charge NTSC/PAL auto switch... -
Page 5: Specifications
Camera Test & Video Borescope 4.Specifications Camera Sensor size 1/4inch CMOS Sensor pixel 300,000 Maximum resolution 640 x 480 Maximum frame rate 30FPS/S Focusing method: Fixed focus15cm~25cm(5.9”~9.8”) 1m(39”) Gooseneck length Camera diameter 17mm(0.66”) TFT-LCD Color TFT-LCD size: 2.4 inch 480(W) x 234(H) Display resolution Active area: 48mm x 35.6mm... -
Page 6: Standard Configuration
Camera Test & Video Borescope 5.standard configuration • BS-050 • 17mm Imager • Hook,Magnet,Mirror Attachments • Lithium batteries 6.Panel name and function description 1.USB Charge 2.(Inside video)Camera 3.Power button/ Mode button 4.External AV input 5.Status Indicator 6.Goose-shaped 7.Light source level 8.Camera connectors 9.System reset DC5V 500mA... -
Page 7: Operation Instructions
Camera Test & Video Borescope 7.Operation Instructions Open and closed systems • Power Switch: long press and hold the on/off button, Video borescope start, and long press and hold the on/off button again to power off the Video borescope. • USB charging start: the system turned off, insert a USB charging, the system will automatically switch on and displays the LOGO, and then enter the LED charge indication states, TFT-LCD, Camera power supply will not be open,... - Page 8 Camera Test & Video Borescope Image signal system • Signal path: there are two accesses of the image signal entering, one way is for the image signal of inside camera and the other is for the external AV signal. • Signal Switching: The meter’s signal access is default of inside camera, on the TFT-LCD it display the illumination level indication, so when an external signal comes, the unit will automatically to switch to external...
- Page 9 Camera Test & Video Borescope • Signal format instructions: When the switch to the external signal,TFT-LCD upper-left corner will indicate the current image signal format. Power Supply Management • Power Supply Instructions:When the system battery voltage is greater than 4.1V when the upper right corner of TFT-LCD display "...
- Page 10 Camera Test & Video Borescope 8.Notes • The non-professional persons should not open the machine cover • Put down with caution. • The camera is waterproof, but the scope body isn’t waterproof, so please do not put the microscope instrument under rain or wet areas, or operate it in moist location.
Need help?
Do you have a question about the Zi-9633 and is the answer not in the manual?
Questions and answers