Advertisement
Using the Camera
Note: To change the quality of still images, you'll need to switch to Snapshot mode by press-
ing the Snapshot button once.
Setting the sleep timer
Your camera will go to sleep if it is not used for 3 minutes.
To change the amount of time before the camera goes to sleep:
1. Open the Display Screen and press the Snapshot or Record button to turn on the camera.
2. Use the OK button on the Navigation Pad to go to the Main Menu.
3. Press the Down Arrow button until Setup is highlighted and press the OK button to select.
4. From the Setup Menu, use the Up and Down Arrow buttons to highlight Sleep Timer and
press the OK button to select.
5. Use the Up and Down Arrow buttons to highlight 3 minutes, 10 minutes, or Now and press
the OK button to select.
6. If you selected Now, the camera will turn off right away. If you selected 3 or 10 minutes,
the camera will wait that long before turning off.
15
Advertisement
