Component Video Connection - LG TB106 Owner's Manual

14 Connecting
,
Note
If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device's audio sound may be distorted or
may not output.
When you connect a HDMI or DVI
compatible device make sure of the
following:
- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
2
device and leave it for around 30 seconds,
then switch on this unit.
- The connected device's video input is set
correctly for this unit.
- The connected device is compatible with
720 x 480i (or 576i), 720 x 480p (or 576p),
1280 x 720p, 1920 x 1080i or 1920 x 1080p
video input.
Not all HDCP-compatible HDMI or DVI
devices will work with this unit.
- The picture will not be displayed properly
with non-HDCP device.
- This unit does not playback and TV screen
is changed to black or green screen or the
snow noise may occur on the screen.
If there is noise or lines on the screen, please
check the HDMI cable and usea higher
version cable than High Speed HDMI™
cable.
>
Caution
Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the unit and then turn it
on again.
When the HDMI connection with HDCP is
not verifi ed, TV screen is changed to black
or green screen or the snow noise may
occur on the screen. In this case, check the
the HDMI connection, or disconnect the
HDMI cable.
TB106-D0F-ADEULL-ENG.indd 14 TB106-D0F-ADEULL-ENG.indd 14

Component Video Connection

Connect the COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks on the unit to the
corresponding input jacks on the TV using
component cables.
You can hear the sound through the system's
speakers.
Pr/Cr
VIDEO OUT
Pr/Cr
iPod DOCK
Pb/Cb
L
Pb/Cb
R FM
Y Y
COMPONENT VIDEO OUT
AUX IN
ANTENNA
(PROGRESSIVE SCAN) OPTICAL IN
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
POWER IN
Unit
TV
Green
Blue
Red
Not
supplied
11. 11. 30 11. 11. 30 2:16 2:16