StarTech.com LTANCHORL Quick Start Manual
StarTech.com LTANCHORL Quick Start Manual

StarTech.com LTANCHORL Quick Start Manual

Laptop lock anchor - large

Advertisement

Quick Links

Laptop Lock Anchor - Large

Product Diagram (LTANCHORL)

1
Note: Security Cable and Lock sold separately.
Component
• Used to hide the Mounting Screws.
1
Security Plate
• Used to prevent access to the Mounting
Screws.
• Used in place of a stationary object to secure a
2
Desk Anchor
connected Device.

Requirements

For the latest requirements, please visit www.startech.com/LTANCHORL.

Installation

Notes: The Desk Anchor is not recommend for use outdoors, in high humidity
conditions, on glass, ceramic tile, or water absorbent materials.
The following surface types must have a primer applied before the Desk Anchor can
be properly installed: copper, brass, or plasticized vinyl.
For maximum security, it is recommended that both Adhesive Backing and
Mounting Screws are used when installing the Desk Anchor.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
2
Function
1. Position the Desk Anchor on the surface you wish to mount it to.
Note: Use a pencil to draw an outline around the Desk Anchor. This will ensure that
you know the area you need to score using the Abrasive Pad.
2. Use the Abrasive Pad (included) to score the surface area you intend to mount the
Desk Anchor on. Be careful to only score the surface that the Desk Anchor will
cover.
3. Use the Alcohol Pad (included) to clean the scored surface prior to installation.
Allow the alcohol to dry before installing the Desk Anchor on the surface.
Note: (Optional) Use the Screw Holes on the Desk Anchor as a guide to drill pilot
holes.
4. Remove the Adhesive Backing on the back of the Desk Anchor, exposing the
adhesive surface. Secure the Desk Anchor to the scored area. Apply the adhesive
backing to the surface at room temperature 60 °F (16°C).
5. Before connecting a Security Cable to the Desk Anchor, allow the adhesive
backing at least 24 hours to bond to the surface.
6. Insert the Mounting Screws (x2) into the Mounting Holes on the Desk Anchor.

Installing the Mounting Screws

Quick-Start Guide
Desk Anchor
Manual Revision: March 21, 2019 11:10 AM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LTANCHORL and is the answer not in the manual?

Questions and answers

Summary of Contents for StarTech.com LTANCHORL

  • Page 1 For maximum security, it is recommended that both Adhesive Backing and Mounting Screws are used when installing the Desk Anchor. Installing the Mounting Screws To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support. Manual Revision: March 21, 2019 11:10 AM...
  • Page 2 StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.

Table of Contents