Advertisement
Assembling or Disassembling operation instructions
1.Assembling method
A. S-shape blade holder 1 (Fig.1)
B. S-shape blade holder 2 (Fig.2)
C. Assemble the S-shape blade holder 2 (Fig. 1) onto the S-shape blade holder 1
(Fig. 1):
Grasp the top part of S-shape blade holder 2 (Fig.1) with finger and then the
position of hte slot .(Fig. 3 ), after it, rotate it to the left to lock it well in position
(Fig.4).
Note: Please follow the operating instruction to avoid the finger being hurt.
2.Disassembling method
A. Disassemble the S-shape blade holder 2 (Fig.1) from the component shown in
Fig.6:
Firstly, grasp the S-shape blade holder 1 with left finger and then grasp the top part
Fig.1
Grasp the top part with
your finger and then
align the position of
hte slot .
Fig.3
Page 3 of 5
Fig.2
Grasp the S-shape blade
holder 2 with finger and
rotate it to the left to lock it
well in position.
Fig.4
Advertisement
