1.3
Monitor introduction
1.3.1.
Front.view
1
1.
button:
•
Activates the QuickFit function.(Please refer to 1.3.3 QuickFit Function).
2.
•
Selects a desired preset mode.
•
Exits the OSD menu or goes back to the previous menu when the OSD
menu is active.
•
Automatically adjusts the image to its optimized position, clock, and phase
by pressing this button for 2-4 seconds (for VGA mode only).
3.
•
Decreases values or moves your selection left/down.
•
Volume hotkey
4.
MENU button:
•
Turns on the OSD menu. Enacts the selected OSD menu item.
5.
•
Increases values or moves your selection right/up.
•
Brightness hotkey
6.
button:
•
Selects an available input source.
Press
connect HDMI/DisplayPort cable with the monitor.
1-2
2
3
button:
button:
button:
(Input Select button) to display HDMI/DisplayPort signals after you
4
5
6
Chapter 1: Product introduction
7
7