Advertisement
For this "Test Run" the LuckyJump grid will be customized to demonstrate how much easier
working with the
mouse can be. Refer to the following to customize either the LuckyJump or NetJump grid:
1. Double-click the mouse
In the Mouse Properties window select the
Settings tab.
2. You will see the default settings for LuckyJump.
Scroll to Help in the Command List and select it.
3. Move the cursor to the LuckyJump grid and click
the bottom-left Documents item. Notice the
cursor changes to a "Pointing finger" and the
Documents icon is replaced with the Help icon.
4. Now scroll to the end of the Command List and
assign the Test Command Menu to the
LuckyJump grid in the same way. (See Creating
Your Own Command Menu on page 10 if you
have not already created a Test Command Menu.)
5. Continue customizing the LuckyJump menu by
assigning commands from the Command List to
the LuckyJump grid.
6. After you have added all the commands you want,
click on the Buttons tab and assign LuckyJump to
the button you want. (In most cases you will
assign LuckyJump to the third button. Most users
prefer to leave the default Context Sensitive Help
setting on the second button.)
7. Click OK to close the Mouse Properties
window.
8. Now, just press the mouse button assigned to
LuckyJump and the LuckyJump grid opens right
under the mouse cursor. (Move the mouse over
each item in the grid for a description.)
Some of the commands in LuckyJump are described
in more detail below.
icon in the system tray.
T
Y
M
T
Y
M
A
K
E
O
U
R
O
U
S
E
A
K
E
O
U
R
O
U
S
E
T
R
T
R
O
N
A
E
S
T
U
N
O
N
A
E
S
T
U
N
Advertisement
Need help?
Do you have a question about the RFW-23 and is the answer not in the manual?
Questions and answers