Advertisement
HOW TO CLEAN
C l e a n e r s : Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents
on any surface.
E x t e r i o r : Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains
and for periodic waxing, use silicon wax.
F r e e z e r : When refrigerator needs defrosting turn thermostat dial to "OFF".
Do not use sharp instruments to scrape off ice/frost.
R e f r i g e r ation Section: Wash shelves and other removable parts in warm
sudsy water, rinse and dry. Wash interior with baking soda solution (3
Tablespoons to 1 Liter of water) or warm sudsy water, rinse and dry.
M a g n e t i c Door Seals : Wash with warm sudsy water.
The Finishing To u c h : Replace all parts and return thermostat dial to desired
s e t t i n g .
HOW TO INSTA L L
Install refrigerator in a convenient location away from extreme heat and cold.
Allow sufficient clearance between the refrigerator and side wall so the door
will open without obstruction. Refrigerator is not designed for recessed
i n s t a l l a t i o n .
Select a space with strong level floor.
Allow 5 inches of space between the
r e f r i g e r a t o r's side and the wall.
POWER CORD REPLACEMENT
If the refrigerator's power cord is damaged, have it replaced by a qualified
repair agent.
5
W H AT TO DO...
When the fridge is not in use for a prolonged period:
• Remove the power plug from the power point.
• Remove all contents from the fridge.
• Dry the interior and leave the door open for a few days.
When you wish to move the fridge:
• Secure all movable parts and contents.
(Package them separately if necessary. )
• Transport the fridge only in an upright position. In any other position you
may damage the compressor.
Before calling service, please follow the checklist below.
This may save you an expensive service call.
If the refrigerator seems too warm inside:
• Check that the door has not been opened too frequently or for too long.
• Check that the interior circulation is not obstructed by having too many
goods stored. (The fridge is overloaded)
• Did you store anything hot, without first cooling it to room temperature?
• Is there sufficient clearance around all sides and above the fridge?
If the fridge starts making any unusual noises:
• Is it wobbling? Re-level it and check if it now operates normally.
• Have any objects fallen behind the fridge? If so, remove them and check if
operation is now normal.
• Are any containers inside the fridge vibrating or resonating? If so, rearrange
them then check to see if operation has returned to normal.
WA R N I N G-Improper use of the grounding plug can result in a risk of electric
shock. If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding plug and a 3-slot receptacle that
will accept the plug on the appliance. The marked rating of the extension
cord should be AC11 5 - 1 2 0 V, 10A, or more. If a grounding adapter is used,
make sure the receptacle box is fully grounded.
6
Advertisement
