Advertisement
II. BATTERY INSTALLATION
(Transmitter & Vehicle)
Requires 3 AA alkaline batteries for the vehicle and 2 AA
alkaline batteries for the transmitter. Batteries not included.
Vehicle
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Your vehicle requires 3 AA alkaline batteries. Install with
polarity (+/-) as shown inside the battery compartment.
3. Replace battery cover and tighten screw.
Transmitter
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Transmitter requires 2 AA alkaline batteries. Install with
polarity (+/-) as shown inside the battery compartment.
3. Replace battery cover and tighten screw.
NOTE: Once the batteries are installed the transmitter
will always be "ON" and will work automatically the
moment you use it.
III. OPERATION
FORWARD
2
AA
X
REVERSE
TURN LEFT
3
AA
X
3
AA
X
3
AA
X
TURN RIGHT
Advertisement
