Asus VS198 Series User Manual page 16

3. Image
You can adjust the image Sharpness, Aspect Control, Position (VGA
only), and Focus (VGA only) from this main function.
• Sharpness: Asjust the picture sharpness. The adjusting range
is from 0 to 100. (Only available for selecting "Standard Mode" in
Splendid menu.)
• Aspect Control: Adjust the aspect ratio to "Full", "4:3".
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at
"Standard Mode".)
• Position: Adjust the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100. (Only available for VGA input.)
• Focus: Reduce Horizonal-line noise and Vertical-line noise of
the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100. (Only available for VGA input.)
4:3 is only available when input source is in 4:3 format.
4. Input Select
Select the input source from VGA, DVI.
3-3
VS197
Splendid
Color
Image
Input Select
System Setup
Move
VS197
Splendid
Color
Image
Input Select
System Setup
Move
Sharpness
Aspect Control
ASCR
Position
Focus
Menu Exit
VGA
DVI
Menu Exit
40
Full
OFF
Chapter 3: General Instruction