Advertisement
Operating Instructions
(continued)
CHECK FILTER FEATURE, YOU WILL SEE:
Note: This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation. The LED
(light) will illuminate after 250 hours of operation. To reset
after cleaning the filter, press the "Filter Reset" button and
the light will go off.
CLEAN AIR FEATURE(on some models):
DO THIS:
PRESS
CLEAN AIR
BUTTON
FAULT CODES:
If the display reads "AS" , a sensor has failed. Contact your
Authorized Frigidaire Service Center.
TO CHANGE TEMPERATURE DISPLAY:
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
2009 Electrolux Home Products, I
n
. c
Operating Instructions
PRESS FILTER
RESET BUTTON
Note: When this feature is "ON", the electronic air purifier is
energized to remove pollen and impurities from the air. To
cancel this feature, press the Clean Air button (the LIGHT
will turn off).
Note: This feature can be activated on the unit touch pad
ONLY.
YOU WILL SEE:
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
DO THIS:
l A
r l
g i
h
s t
r
s e
r e
e v
. d
9
Advertisement
