IntroductIon __________________________________2 ImPortant Safety InStructIonS _______________3 LocatIonS of ImPortant LabeLS _______________6 Vacuum PumP comPonentS _____________________7 thank you for purchasing a california air tools product. Pre-oPeratIon checkLISt ______________________8 Package contents & assembly____________________8 record the model and serial number indicated on the...
DANGER even quality built equipment might need service or repair parts. Contact the California Air Tools Customer Service department: Phone: 1-866-409-4581 Online: WWW.CALIFORNIAAIRTOOLS.COM Please provide the information below: KICKBACK Model number and Serial number and specifications shown on the Model number/Serial number plate.
Page 4
WARNING WARNING RISK TO BREATHING FLYING OBJECTS Flying objects can cause injury to the eyes, head and Dust or dust-like particulates caused by other parts of the body. power-sanding, sawing, grinding, drilling or any other construction-like activities can contain Air-powered equipment and power tools are capable contaminants that are harmful to breathe.
Page 5
WARNING WARNING EXPLOSION EXPLOSION FIRE Improper care could lead to the air tank bursting or Use caution to minimize risk of fire or explosion. exploding. It is normal for the air compressor motor and Drain air tank daily or after each use to prevent pressure switch to produce sparks while operating.
These labels provide important safety and maintenance information. These labels should be considered as permanent parts of this product.. Should any of these labels become illegible, damaged or removed, please contact California Air Tools Customer Service department at 1-866-409-4581 for replacements.
VP50 VP100 description description description description Fan Cover Metal Strengthen Sheet Crank Case Crank Connecting Rod bearing Piston Ring Holding Screw Plate Pinch Cheese Head Screw Pressure Plate Screw Crank Case Cylinder Leading-out Line Guard circle Cylinder Obturating Ring...
PRe-OPeRATION CHeCkLIST Package contents & assembly VP50 / VP100 model: Package contents: Inspect for damage Vacuum Pump/Motor Owner's Manual before using the vacuum pump/motor inspect all parts for Air Filter damage. Capacitor do not use the vacuum pump/motor if any damage is found.
Installation maintain a clear area Correct installation is your responsibility. It is very important that the vacuum pump is positioned so that there is adequate airflow around the machine. There must be at Make sure you have the proper installation conditions and that least 2 feet of obstacle-free space surrounding and above the clearances do not block the air flow.
electrical Power OPeRATING THe VACuuM PuMP electrical Power requirements Save this manual for future reference. DANGER SHOCK There is a danger of electric shock. Use only undamaged electrical cords. DO NOT touch bare wires or receptacles. DO NOT operate air compressor in wet weather or in wet conditions.
MAINTeNANCe WARNING changing the air filter The air filter is designed to reduce noise and help prevent particulates in the pump. After being used for a period of time, the air filter will become FLYING OBJECTS clogged. This will reduce the air intake capabilities of the vacuum pump, reducing performance.
TROubLeSHOOTING ProbLem PoSSIbLe cauSe PoSSIbLe SoLutIonS Check that the main voltage corresponds to specifications. An extension cord that is too thin or too long can cause a voltage drop and cause the Overloaded because of motor overheating. motor to overheat. Allow the motor to cool down. The vacuum pump stopped and use heavy duty extension cords.
SPeCIFICATIONS electrical circuit Pressure switch Overload protector Electric cord Motor for motor (MAX temperature 135°C) Red cords for Solenoid Capacitor valve Electric cord for motor Earth wire (Green) Customer Support: 1-866-409-4581...
Page 14
This warranty does not transfer to subsequent owners. California Air Tools Inc. will repair or replace, at its option, any parts that are proven by an authorized service center to be defective in material or workmanship under normal use during the applicable warranty time period as stated below. This limited warranty covers the cost of the replacement parts and labor for all defects when installed by an authorized service center.
Warranty registration with California Air Tools Inc. is required on all products. you can mail the enclosed registration form or fill out the registration form on the California Air Tools website. Warranty is also available by keeping and showing your original receipt from the date of purchase to an Authorized California Air Tools Service Center.
Other Features (describe) _____________________________________________________________________ What other Power equipment are you interested in purchasing in the future? _____________________________ Thank you for registering your product. Mail to: California Air Tools 8560 Siempre Viva Road, unit 3A San diego, CA 92154 Customer Support: 1-866-409-4581...