Advertisement
Interior light
and light pad
Removing
full extension
drawers
The interior light makes it easy to view your
wine labels and enhances the display of your
collection.
When the light pad is pressed and the word
ON is displayed, the light will remain on for
one hour before automatically turning off.
When the light pad is pressed and the word
OFF is displayed, the light will come on only
when the door is opened.
All of the full extension drawers pull out
so bottles can be conveniently added or
removed.
Any of the full extension drawers can be
removed to store larger bottles.
To remove:
1. Pull the full extension drawer out to the
STOP position.
2. Push the tab on right drawer guide down
while pulling the tab on left guide up, and
pull the drawer out.
To replace:
1. Push the drawer slide arm back into the
unit.
2. Pull the small slide sub-assembly
completely forward.
3. Insert the sides of the drawer back into the
guides.
4. Push until the tabs lock into place.
Controls and Features
Wine Reserve
For best viewing, do not store a bottle on the
top shelf directly under the light. Remember
to turn off the light when it is no longer
needed.
Appearance may vary
Sub-assembly
To replace, push drawer
slide arm back into unit
NOTE: Make sure the tabs on the full
extension drawer guides are fully engaged
before loading any bottles. Pull the drawers
out all the way to the STOP position and push
back in several times to make sure locking
tabs are properly engaged.
Tab (push tab down on
right drawer guide, pull
tab up on left drawer
guide)
Sub-assembly
Pull small slide sub-assembly
completely forward
9
Advertisement
