TP-Link Archer AX55 V1 User Manual page 23

Chapter 4
2. Go to Advanced > IPv6.
3. Enable IPv6 and select the internet connection type provided by your ISP.
Tips:
If you do not know what your internet connection type is, contact your ISP or judge according to the already known
information provided by your ISP.
4. Fill in information as required by different connection types.
1 ) Static IP: Fill in blanks and click Save.
2 ) Dynamic IP(SLAAC/DHCPv6):
your ISP requires. Click
3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6
server. Click
Save and then click Connect.
Click
Save and then click Renew.
Advanced to input further information if your ISP requires. Click
Set Up Internet Connection
Advanced to input further information if
19