6
ASSEMBLING AND PREPARING
Detaching the stand base
1
Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
22MB35PU
2
Using a coin, turn the screw in the stand base
counterclockwise. Detach the stand base from
the stand body.
Stand Body
Stand Base
24MB35PU
2
Detach the stand base from the stand body.
CAUTION
The components appearing in the illustrations
y
may look different from the actual product.
Do not carry the monitor upside-down as this
y
may cause it to fall off its stand, resulting in
damage or injury.
To avoid damaging the screen when lifting or
y
moving the monitor, only hold the stand or the
plastic cover. This avoids putting unnecessary
pressure on the screen.
Only remove the tape and the locking pin when
y
the monitor is mounted on the stand base and
is in an upright position. Otherwise, the stand
body may protrude, which may lead to injury.
Detaching the stand body
1
Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a screwdriver, remove the four screws
and detach the stand from the monitor.
22MB35PU
24MB35PU