(Depending on model)
• Do not use a sharp object when you detached the cable
cover. This could damage the cable or the cabinet. It may also
cause personal harm. (Depending on model)
8
• When installing the wall mounting bracket, it is recommended to
cover the stand hole using tape, in order to prevent the influx of dust
and insects. (Depending on model)
• Screw length from outer surface of back cover should be under 8 mm.
(Only 24/28LT66*)
Wall mount Pad
Standard screw
: M4 x L10
7
7
Stand hole
Back Cover
Wall mount Pad
Back Cover
Max. 8 mm