EasyPro LED6WS Instructions For Operation

Download this manual

6 Watt Submersible, Warm White, Low Voltage • LED6WS

Underwater LED Light

Instructions for Operation • Safety • Warranty

Thank you for purchasing an EasyPro submersible LED pond light. With this warm, white

LED light you can make your fountain glow, illuminate your pond from within, highlight

your waterfall and extend the enjoyment of your water feature in the evening hours. The

LED6WS can be used in the landscape out of the water or as a submersible underwater

light with other warm white LED or halogen fixtures.

LED6WS Specs:

• 304 stainless steel housing, glass lens, epoxy

filled base

• Power usage at 12V AC: 6 watts

• Power cable: 30 ft, # 17-2, SPT-2-W leads

• 5 year warranty on housing

• 2 year warranty on bulb

(Magnetic 12 vac transformer required)

LED Bulb information

• Integrated driver

• 25° beam angle

• Color Temperature: 2800° K

• 2 year warranty

(Magnetic 12 vac transformer required)

• Free of UV/IR radiation

• Mercury free, RoHS compliant

• Uses LED chip manufactured by CREE

Safety and Electrical Connections:

1 Always disconnect the electrical supply before handling, maintaining, repairing or

installing any pond equipment.

2 Light(s) must be attached to a 12 volt UL listed magnetic transformer.

3 Never hook the lights directly to a 120 volt or higher outlet.

4 Connect the transformer only to a 120 volt receptacle that is protected by a Ground

Page 1 The LED6WS can be used in the landscape out of the water or as a submersible underwater light with other warm white LED or halogen fixtures.
Page 2 The LED6WS has a limited warranty against any mechanical or material defects for a period of five years from the date of purchase on the housing and two years on the LED bulb. LED6WS fixtures must be installed on a magnetic 12v AC low voltage system. Limited warranty only covers properly installed and maintained units.