2nd
3rd
Source Detection
Key Repeat Time
Power LED On
Reset All
Description
Select either
Auto
or
Manual
as the method to recognise input source.
Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
Configure the settings to enable or disable the power LED located at the lower part of the product.
•
Working: The power LED is on when the product is turned on.
•
Stand-by: The power LED is on when the product is turned off.
•
Return all the settings for the product to the default factory settings.
No Repeat
is selected, a command responds only once when a button is pressed.
25