Advertisement
5.8G Frequency
IPQ4019: 5.150GHz~5320GHz; QCA9886: 5.500GHz!5.825GHz
5.8G Wi-Fi Standard
802.11 a/n/ac
Interface
1 * 10/100 /1000Mbps RJ45 WAN Port
1 * 10/100 / 1000Mbps RJ45 LAN Port
Antenna
Data Rate
End Users
RF Power
DC
PoE
LED light
Surge
ESD
Max Power
Consumption
Size
Weight
Firmware Features:
Operation mode
Wireless AP: Plug and Play.
Gateway: Dynamic IP/Static IP/PPPoE
Wi-Fi Repeater: Bridge exist wireless signal, then extend to more range.
WISP: For WLAN ISP, bridge ISP's exist wireless signal, then dial-up to
Wireless Functions
Support MAC filter
Support Wi-Fi time on/off to save energy
Networking Function
Device Management
Reboot the device: including time reboot or reboot immediately
1 * Reset button, press 10 seconds to revert to default setting
Build in 3dBi MIMO Antenna
2200Mbps
150+
≤ 25dBm
12V----2A
48V (IEEE 802.3at)
Sys, WAN, LAN
Different Mode: ± 2KV, Common Mode: ± 4KV
± 4KV
≤ 24W
198mm * 198mm * 41.02mm
Net weight: 786.7g
obtain Ethernet and extend more wireless range.
Multiple SSID functions: 2.4GHz: 4; 5.8GHz: 8
Support SSID hidden
Support seamless roaming, 802.11kvr standard.
Support 5G Prior for a faster Ethernet.
Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x
Support client isolation to improve the wireless stability
Support RF power adjustable, adjust the RF power based on environment.
Support user quantity limited, Max 64 users to access each band.
VLAN settings
Cloud access support in gateway mode
Back-up the configuration
Restore the configuration
Reset to factory default
Admin management password modify
High Power Ceiling Wireless AP
Advertisement
