P-Settings are used to control your Bolzzen Commando's Advanced Settings. To enter the P-Settings screen,
button. Follow the button layout in the previous page to navigate.
P-Setting
P0
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
Use
Speed Unit (KMPH/MPH)
Password Entry Screen
Password Function (For Power On)
Change Password Function
Wheel Diameter Setting
Battery Voltage Setting
Zero Start
(After Turning On, Holding The Accelerator At A Steady Level For 2 Seconds And Cruise Will Be Set. To Cancel Cruise, Switch Down A Gear, Or Long-press "M")
Speed Limit
Long-Press the "M"
Recommended Value
Please Remember The New Password.
If You Forget Your New Password, Long-press "M" And "-" Buttons For 2-seconds To Reset Password To Factory