Advertisement
existing network infrastructure. Pls note, the default is 48V IEEE 802.3at PoE, 24V Passive PoE is
possible by change PCB board.
Multiple Operation Mode
It supports wireless AP, Gateway, WISP, WiFi Repeater operation mode, max to meet with
different operation request.
Main Features:
Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
1*10/100/1000Mbps WAN Port，1*10/100/1000Mbps LAN Port
500mW high power, Qualcomm Chipset, 16M Flash, 128M DDR2 RAM, more user, more stable
Support 48V active PoE, work with IEEE 802.3at standard PoE switch or 48V PoE adapter.
Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz), support tag
VLAN based on SSID to protect the whole data safety.
Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode
With function of firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better
application in different environment
Support DDNS, VPN pass through, Port forwarding and DMZ host
Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
Product Spec.:
Hardware:
Chipset
Qualcomm QCA9563 + QCA9882 +QCA8334
Standard
802.11ac/b/g/n, MIMO technology
Memory
128MB DDR2 RAM
Flash
16MB
1 * 10/100/1000Mbps RJ45 WAN Port, WAN port support IEEE 802.3at
standard PoE
Interface
1 * 10/100/1000Mbps RJ45 LAN Port
1 * Reset button, press 15 seconds to revert to default setting
Antenna
Build in Panel antenna, 12dBi in 2.4GHz, 14dBi in 5.8GHz
Power consumption
48V PoE<30W
Size
315mm * 145 mm * 80 mm
RF Data
2.4G: 802.11b/g/n;
2.4GHz: 2.312GHz to 2.4835GHz
Frequency
5GHz: 5.020 - 6.1000 GHz
OFDM = BPSK,QPSK, 16-QAM, 64-QAM
Modulation
DSSS = DBPSK, DQPSK, CCK
11ac Outdoor WiFi Bridge
5GHz: 802.11a/n/ac
Advertisement
