CHIEF CM6SV65 Installation Instructions Manual

Automated single vertical door system

Advertisement

I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Automated Single Vertical Door System
This device complies with part 15 of the FCC rules. Operation is subject to the following 2 conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio or television
communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment to an outlet on a circuit other than that to which the receiver is connected
Consult the dealer or and experienced radio/TV technician for help
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
CM6SV65 and 83

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CM6SV65 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CHIEF CM6SV65

  • Page 1 Increase the separation between the equipment and receiver • Connect the equipment to an outlet on a circuit other than that to which the receiver is connected Consult the dealer or and experienced radio/TV technician for help Istruzioni di installazione Installatie-instructies Instructions d´installation CM6SV65 and 83...
  • Page 2: Installation Instructions

    CM6SV65 and 83 CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
  • Page 3 Doors must be made of a non warping material. • Maximum door width = 72" • Maximum door weight = 50 Ibs TOOLS REQUIRED FOR INSTALLATION PARTS (A) x1 (B) x1 (with motor) (C) x1 (E) x1 (D) x1 CM6SV65 and 83 (G) x2 (F) x2...
  • Page 4: Assembly And Installation

    CM6SV65 and 83 ASSEMBLY AND INSTALLATION Installation CAUTION: Tracks must be parallel. Small variations in cabinet width will affect performance. The lift tracks are designed to be mounted to the sides of the cabinet through the prepunched holes in the base of the tracks.
  • Page 5 Installation Instructions CM6SV65 and 83 Figure 2...
  • Page 6 CM6SV65 and 83 Constructing and Assembling The Counterweights The counterweights are critical to the proper operation of the system. The following procedure identifies how to build counterweights that are of the proper size for the door being used. 2 counterweights are required, one for each side.
  • Page 7 300 watts total. Figure 4 The system also provides the option of creating and saving two different lighting "scenes". Please refer to the Remote Control instructions for information on how to configure "scenes". Figure 5 CM6SV65 and 83 From Dimmer Module...
  • Page 8: System Activation

    CM6SV65 and 83 System Activation Insert plug from the power supply into the jack on the top of the motor box. 24VDC Input Top of Cabinet Front of Cabinet Figure 6 Plug Powercord into 115VAC outlet. IMPORTANT ! : A quality surge protection device is recommended.
  • Page 9 Control Input Figure 11 NOTE: Making a momentary dry contact closure between the common and the open, closed, stop, or sequence will activate the system in that mode. Control Input on Front of Motor Box Figure 12 CM6SV65 and 83...
  • Page 10 CM6SV65 and 83 8820-000019 2007 Chief Manufacturing www.chiefmfg.com 03/07 USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615...

This manual is also suitable for:

Cm6sv83

Table of Contents