Preventing The Unauthorized Use Of The Projector [Password] - Canon LV-7280 User Manual

 Preventing the Unauthorized Use of the Projector [Password]

A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a
password is set, turning on the projector will display the password input screen. Unless the correct password is
entered, the projector cannot project an image.
NOTE: The [Password] setting cannot be cancelled by using the [Reset] of the menu.
To enable the Password function:
1. Press the MENU button.
the menu will be displayed.
2. Press the button twice to select [Setup] and press the
3. Press the button twice to select [Installation].
4. Press the button three times to select [Password] and press the OK button.
the Off/On menu will be displayed.
5. Press the button to select [On] and press the OK button.
the [Password] screen will be displayed.
6. Type in a combination of the four
to cancel this operation, press the MenU button.
NOTE: A password must be 4 to 10 digits in length. Please make a note of your password.
button or the OK button to select [General].
buttons and press the OK button.
40